Free NSE7_SDW-6.4 Exam Files Downloaded Instantly UPDATED [2023]
100% Pass Guaranteed Free NSE7_SDW-6.4 Exam Dumps
Fortinet NSE7_SDW-6.4 exam is a comprehensive certification exam that tests an individual's knowledge and skills in the field of SD-WAN. NSE7_SDW-6.4 exam is designed for networking and security professionals who want to validate their expertise in designing, implementing, and managing SD-WAN solutions using Fortinet products and technologies. Candidates can prepare for the exam by gaining hands-on experience with Fortinet products and solutions and studying industry best practices and standards.
NEW QUESTION # 17
What are two benefits of using FortiManager to organize and manage the network for a group of FortiGate devices? (Choose two )
- A. It improves SD-WAN performance on the managed FortiGate devices.
- B. It sends probe signals as health checks to the beacon servers on behalf of FortiGate
- C. It reduces WAN usage on FortiGate devices by acting as a local FortiGuard server
- D. It simplifies the deployment and administration of SD-WAN on managed FortiGate devices
- E. It acts as a policy compliance entity to review all managed FortiGate devices
Answer: C,D
NEW QUESTION # 18
Which two reasons make forward error correction (FEC) ideal to enable in a phase one VPN interface? (Choose two )
- A. FEC transmits additional packets as redundant data to the remote device.
- B. FEC improves reliability which overcomes adverse WAN conditions such as noisy links.
- C. FEC transmits the original payload in full to recover the error in transmission.
- D. FEC is useful to increase speed at which traffic is routed through IPsec tunnels.
- E. FEC reduces the stress on the remote device jitter buffer to reconstruct packet loss
Answer: A,B
NEW QUESTION # 19
Which three parameters are available to configure SD-WAN rules? (Choose three.)
- A. Application signatures
- B. Source and destination IP address
- C. URL categories
- D. Internet service database (ISDB) address object
- E. Type of physical link connection
Answer: A,B,D
Explanation:
SD-WAN 6.4.5 Guide Page 76.
https://docs.fortinet.com/document/fortigate/7.2.1/administration-guide/22371/sd-wan-rules-best-quality
NEW QUESTION # 20
Refer to the exhibit.
Based on the exhibit, which two statements about traffic passing through the SD WAN member port2 are true? (Choose two)
- A. FortiGate performs new routing lookups for new packets after a route change
- B. FortiGate flushes all routing information from the session table after a route change
- C. FortiGate marks an existing session routing information as persistent
- D. FortiGate, by default, resets all session routing information after a route change
Answer: A,C
NEW QUESTION # 21
Which statement is correct about SD-WAN and ADVPN?
- A. SD-WAN does not monitor the health and performance of ADVPN shortcuts.
- B. You must use OSPF.
- C. Routes for ADVPN shortcuts must be manually configured.
- D. SD-WAN can steer traffic to ADVPN shortcuts established over IPsec overlays configured as SD-WAN members.
Answer: D
NEW QUESTION # 22
Refer to the exhibit.
Multiple IPsec VPNs are formed between two hub-and-spokes groups, and site-to-site between Hub 1 and Hub 2 The administrator configured ADVPN on the dual regions topology
Which two statements are correct if a user in Toronto sends traffic to London? (Choose two )
- A. Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.
- B. Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN
- C. The first packets from Toronto to London are routed through Hub 1 then to Hub 2.
- D. London generates an IKE information message that contains the Toronto public IP address
Answer: A,B
NEW QUESTION # 23
Refer to exhibits.
Exhibit A shows the performance SLA exhibit B shows the SD-WAN diagnostics output.
Based on the exhibits, which statement is correct?
- A. Port1 became dead 1ecause no traffic was offload through the egress of port1.
- B. The SLA state of port1 is dead after five unanswered requests by the SLA servers.
- C. SD-WAN member interfaces are affected by the SLA state of the inactive interface
- D. Both SD-WAN member interfaces have used separate SLA targets.
Answer: B
NEW QUESTION # 24
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SO-WAN interface and the static routes configuration.
Port1 and port2 are member interfaces of the SD-WAN, and port2 becomes a dead member after reaching the failure thresholds Which statement about the dead member is correct?
- A. Dead members require manual administrator access to bring them back alive
- B. SD-WAN interface becomes disabled and port1 becomes the WAN interface
- C. Port2 might become alive when a single response is received from an SLA server
- D. Subnets 100 .64.1.0/23 and 172 . 20 . 0. 0/16 are reachable only through port1
Answer: D
NEW QUESTION # 25
Which statement about using BGP routes in SD-WAN is true?
- A. Dynamic routing protocols can be used only with non-encrypted traffic.
- B. VPN topologies must be form using only BGP dynamic routing with SD-WAN.
- C. Learned routes can be used as dynamic destinations in SD-WAN rules.
- D. Adding static routes must be enabled on all ADVPN interfaces.
Answer: C
Explanation:
Explanation/Reference:
https://www.fortinetguru.com/2019/09/using-bgp-tags-with-sd-wan-rules-fortios-6-2/#:~:text=SD%2DWAN%
20rules%20can%20use,to%20the%20customer's%20data%20center.
NEW QUESTION # 26
Which two tasks about using central VPN management are true? (Choose two.)
- A. You can configure full mesh, star, and dial-up VPN topologies.
- B. You must enable VPN zones for SD-WAN deployments.
- C. FortiManager installs VPN settings on both managed and external gateways.
- D. You configure VPN communities to define common IPsec settings shared by all VPN gateways.
Answer: A,D
NEW QUESTION # 27
Refer to the exhibit.
FortiGate has multiple dial-up VPN interfaces incoming on port1 that match only FIRST_VPN.
Which two configuration changes must be made to both IPsec VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two.)
- A. Specify a unique peer ID for each dial-up VPN interface.
- B. Use unique Diffie Hellman groups on each VPN interface.
- C. Configure the IKE mode to be aggressive mode.
- D. Use different proposals are used between the interfaces.
Answer: B,D
NEW QUESTION # 28
Which statement about using BGP routes in SD-WAN is true?
- A. VPN topologies must be form using only BGP dynamic routing with SD-WAN
- B. Adding static routes must be enabled on all ADVPN interfaces.
- C. Learned routes can be used as dynamic destinations in SD-WAN rules
- D. Dynamic routing protocols can be used only with non-encrypted traffic
Answer: C
NEW QUESTION # 29
What are two roles that SD-WAN orchestrator plays when it works with FortiManager? (Choose two )
- A. It acts as a standalone device to assist FortiManager to manage SD-WAN interfaces on the managed FortiGate devices.
- B. It acts as a hub FortiGate with an SD-WAN interface enabled and managed along with other FortiGate devices by FortiManager.
- C. It acts as an application that is released and signed by Fortinet to run as a part of management extensions on FortiManager.
- D. It configures and monitors SD-WAN networks on FortiGate devices that are managed by FortiManager.
Answer: C,D
Explanation:
SD-WAN 6.4 Guide Page 158.
https://docs2.fortinet.com/document/fortimanager/6.4.0/sd-wan-orchestrator-6-4-0-administration-guide/91581/introduction
NEW QUESTION # 30
When attempting to establish an IPsec tunnel to FortiGate, all remote users match the FIRST_VPN IPsec VPN. This includes remote users that want to connect to the SECOND_VPN IPsec VPN. Which two configuration changes must you make on both IPsec VPNs so that remote users can connect to their intended IPsec VPN? (Choose two.)
- A. Configure different Diffie Hellman groups.
- B. Configure a unique peer ID.
- C. Change the IKE mode to aggressive.
- D. Configure different proposals.
Answer: B,C
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=10114
NEW QUESTION # 31
Which components make up the secure SD-WAN solution?
- A. Datacenter, branch offices, and public cloud
- B. Application, antivirus, and URL, and SSL inspection
- C. FortiGate, FortiManager, FortiAnalyzer, and FortiDeploy
- D. Telephone, ISDN, and telecom network.
Answer: C
NEW QUESTION # 32
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the traffic shaping policy and exhibit B show: the firewall policy FortiGate is not performing traffic shaping as expected basi on the policies shown in the exhibits.
To correct this traffic shaping issue on FortiGate, what configuration change must be made on which policy?
- A. The shaper mode must be applied per-IP shaper on the traffic shaping policy
- B. The web filter profile must be enabled on the firewall policy
- C. The URL category must be specified on the traffic shaping policy
- D. The application control profile must be enabled on the firewall policy.
Answer: B
NEW QUESTION # 33
Which statement is correct about the SD-WAN and ADVPN?
- A. Hub FortiGate is limited to use ADVPN as SD-WAN member interface.
- B. Spoke support dynamic VPN as a static interface.
- C. ADVPN interface can be a member of SD-WAN interface.
- D. Dynamic VPN is not supported as an SD-Wan interface.
Answer: C
NEW QUESTION # 34
Which two statements about SLA targets and SD-WAN rules are true? (Choose two.)
- A. SLA targets are used only by SD-WAN rules that are configured with Lowest Cost (SLA) or Maximize Bandwidth (SLA) as strategy.
- B. When configuring an SD-WAN rule, you can select multiple SLA targets of the same performance SLA.
- C. SD-WAN rules use SLA targets to check if the preferred members meet the SLA requirements.
- D. Member metrics are measured only if an SLA target is configured.
Answer: A,C
NEW QUESTION # 35
Refer to the exhibit.
What must you configure to enable ADVPN?
- A. The protected subnets should be set to address object to all (0.0 .0. o/o).
- B. On the hub VPN, only the device needs additional phase one sett
- C. ADVPN should only be enabled on unmanaged FortiGate devices.
- D. Each VPN device has a unique pre-shared key configured separately on phase one
Answer: D
NEW QUESTION # 36
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A, which shows the SD-WAN performance SLA and exhibit B shows the health of the participating SD-WAN members.
Based on the exhibits, which statement is correct?
- A. Port2 needs to wait 500 milliseconds to change the status from alive to dead.
- B. The dead member interface stays unavailable until an administrator manually brings the interface back.
- C. Check interval is the time to wait before a packet sent by a member interface considered as lost.
- D. The SLA state of port2 has exceeded three consecutive unanswered requests from the SLA server.
Answer: D
NEW QUESTION # 37
......
Latest NSE7_SDW-6.4 dumps - Instant Download PDF: https://pass4sures.free4torrent.com/NSE7_SDW-6.4-valid-dumps-torrent.html