Nov-2025 FREE Cisco 350-401 PRACTICE QUESTIONS AND ANSWERS UPDATES
DEMO FREE BEFORE YOU BUY 350-401 DUMPS
NEW QUESTION # 89
Refer to the exhibit
Communication between London and New York is down Which to resolve this issue?
A)
B)
C)
D)
- A. Option B
- B. Option D
- C. Option A
- D. Option C
Answer: C
Explanation:
Explanation
https://learningnetwork.cisco.com/s/question/0D53i00000Ksyty/tostastns-tottattnt
NEW QUESTION # 90
Drag and drop the characteristics from the left onto the appropriate infrastructure deployment types on the right.
Answer:
Explanation:
NEW QUESTION # 91
What does the Cisco WLC Layer 3 roaming feature allow clients to do?
- A. roam seamlessly between controllers even when the controller management VLANs are different
- B. maintain their connection between APs even when the AP management VLANs arc different
- C. maintain their IP address when roaming to an AP 01 controller with a different client VLAN assignment
- D. maintain their connection even if the client IP address changes when roaming
Answer: C
NEW QUESTION # 92
Drag and drop the characteristics from the left onto the correct infrastructure deployment types on the right.
Answer:
Explanation:
NEW QUESTION # 93
Which benefit is realized by implementing SSO?
- A. minimal network downtime following an RP switchover
- B. physical link redundancy
- C. IP first-hop redundancy
- D. communication between different nodes for cluster setup
Answer: D
NEW QUESTION # 94
Refer to the exhibit.
An engineer must permit traffic from these networks and block all other traffic An informational log message should be triggered when traffic enters from these prefixes Which access list must be used?
- A. access-list acl_subnets permit ip 10.0.32.0 0.0.7.255 log
- B. access-list acl_subnets permit ip 10.0.32.0 255.255.248.0 log
- C. access-list acl_subnets permit ip 10.0.32.0 0.0.7.255 access-list acl_subnets deny ip any log
- D. access-list acl_subnets permit ip 10.0.32.0 0 0.0.255 log
Answer: A
NEW QUESTION # 95
Which action is a function of VTEP in VXLAN?
- A. tunneling traffic from IPv4 to IPv6 VXLANs
- B. encapsulating and de-encapsulating VXLAN Ethernet frames
- C. tunneling traffic from IPv6 to IPv4 VXLANs
- D. allowing encrypted communication on the local VXLAN Ethernet segment
Answer: B
Explanation:
Explanation
VTEPs connect between Overlay and Underlay network and they are responsible for encapsulating frame into VXLAN packets to send across IP network (Underlay) then decapsulating when the packets leaves the VXLAN tunnel.
VTEPs connect between Overlay and Underlay network and they are responsible for encapsulating frame into VXLAN packets to send across IP network (Underlay) then decapsulating when the packets leaves the VXLAN tunnel.
NEW QUESTION # 96
Drag and drop the descriptions of the VSS technology from the left to the right. Not all options are used.
Answer:
Explanation:
Explanation:
Graphical user interface Description automatically generated
NEW QUESTION # 97
Refer to the exhibit.
An engineer must permit traffic from these networks and block all other traffic An informational log message should be triggered when traffic enters from these prefixes Which access list must be used?
- A. access-list acl_subnets permit ip 10.0.32.0 0.0.7.255 log
- B. access-list acl_subnets permit ip 10.0.32.0 255.255.248.0 log
- C. access-list acl_subnets permit ip 10.0.32.0 0.0.7.255 access-list acl_subnets deny ip any log
- D. access-list acl_subnets permit ip 10.0.32.0 0 0.0.255 log
Answer: A
NEW QUESTION # 98
Refer to the exhibit. An engineer attempts to configure a router on a stick to route packets between Clients, Servers, and Printers; however, initial tests show that this configuration is not working. Which command set resolves this issue?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: B
Explanation:
We must reconfigure the IP address after assigning or removing an interface to a VRF. Otherwise that interface does not have an IP address.
NEW QUESTION # 99
Which two characteristics define the Intent API provided by Cisco DNA Center? (Choose two.)
- A. procedural
- B. southbound API
- C. business outcome oriented
- D. northbound API
- E. device-oriented
Answer: C,D
Explanation:
The Intent API is a Northbound REST API that exposes specific capabilities of the Cisco DNA Center platform. The Intent API provides policy-based abstraction of business intent, allowing focus on an outcome rather than struggling with individual mechanisms steps.
Reference:
https://developer.cisco.com/docs/dna-center/#!cisco-dna-center-platform-overview/intent-api-northbound
NEW QUESTION # 100
Refer to the exhibit.
CR2 and CR3 ate configured with OSPF. Which configuration, when applied to CR1. allows CR1 to exchange OSPF Information with CR2 and CR3 but not with other network devices or on new Interfaces that are added to CR1?
A)
B)
C)
- A. Option B
- B. Option A
- C. Option D
- D. Option C
Answer: C
NEW QUESTION # 101
Refer to the exhibit.
Object tracking has been configured for VRRP-enabled routers Edge-01 and Edge-02 Which commands cause Edge-02 to preempt Edge-01 in the event that interface G0/0 goes down on Edge-01?
- A.
- B.
- C.
- D.
Answer: B
Explanation:
In the context of VRRP (Virtual Router Redundancy Protocol), object tracking is utilized to dynamically adjust the priority of a router when a specified event occurs, such as an interface going down. For Edge-02 to preempt Edge-01 when Edge-01's interface G0/0 goes down, the configuration on Edge-01 must include a decrease in its priority so that Edge-02 with a higher priority can become the master router. The correct commands would involve setting up track objects and associating them with the VRRP group, specifying the decrement value for the priority.
NEW QUESTION # 102
Which function does a fabric edge node perform in an SD-Access deployment?
- A. Connects endpoints to the fabric and forwards their traffic
- B. Encapsulates end-user data traffic into LISP.
- C. Connects the SD-Access fabric to another fabric or external Layer 3 networks
- D. Provides reachability border nodes in the fabric underlay
Answer: A
Explanation:
Explanation
There are five basic device roles in the fabric overlay:
+ Control plane node: This node contains the settings, protocols, and mapping tables to provide the endpoint-to-location (EID-to-RLOC) mapping system for the fabric overlay.
+ Fabric border node: This fabric device (for example, core layer device) connects external Layer
3 networks to the SDA fabric.
+ Fabric edge node: This fabric device (for example, access or distribution layer device) connects wired endpoints to the SDA fabric.
+ Fabric WLAN controller (WLC): This fabric device connects APs and wireless endpoints to the SDA fabric.
+ Intermediate nodes: These are intermediate routers or extended switches that do not provide any sort of SD-Access fabric role other than underlay services.
NEW QUESTION # 103
Witch two actions provide controlled Layer 2 network connectivity between virtual machines running on the same hypervisor? (Choose two.)
- A. Use a virtual switch running as a separate virtual machine.
- B. Use VXLAN fabric after installing VXLAN tunneling drivers on the virtual machines.
- C. Use a virtual switch provided by the hypervisor.
- D. Use a single routed link to an external router on stick.
- E. Use a single trunk link to an external Layer2 switch.
Answer: A,C
Explanation:
To provide controlled Layer 2 network connectivity between virtual machines running on the same hypervisor, a virtual switch provided by the hypervisor (B) can be used to manage internal VM traffic. Additionally, a virtual switch running as a separate virtual machine can also facilitate this connectivity. A single trunk link to an external Layer 2 switch (A) or a single routed link to an external router on stick (D) would not be contained within the hypervisor environment. VXLAN fabric (E) is used for overlay networks across different hosts and requires additional tunneling configuration.
Source
1:https://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-1000v-switch-vmware-vsphere/at_a_gl Source
2:https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/vm_fex/vmware/gui/config_guide/2-1/b_GU
NEW QUESTION # 104 
Answer:
Explanation:
See the solution below in Explanation:
Explanation:
Solution:
R30
Config t
router ospf 10
router-id 10.0.1.30
int ran lo0 , e0/0-1
ip ospf 10 a 0
exit
int et0/2
ip ospf 10 a 50
exit
router ospf 10
area 50 range 10.10.0.0 255.255.128.0
area 50 range 10.50.0.0 255.255.128.0
end
NEW QUESTION # 105
What are two device roles in the Cisco SD-Access fabric? (Choose two.)
- A. core switch
- B. border node
- C. vBond controller
- D. edge node
- E. access switch
Answer: B,D
NEW QUESTION # 106
Refer to the exhibit. An engineer is using XML in an application to send information to a RESTCONF-enabled device. After sending the request, the engineer gets this response message and a HTTP response code of 400. What do these responses tell the engineer?
- A. The Content-Type header sent was application/xml.
- B. JSON body was used
- C. The Accept header sent was application/xml
- D. POST was used instead of PUT to update
Answer: C
Explanation:
Accept and Content-type are both headers sent from a client (a browser) to a service.
Accept header is a way for a client to specify the media type of the response content it is expecting and Content-type is a way to specify the media type of request being sent from the client to the server.
The response was sent in XML so we can say the Accept header sent was application/xml.
NEW QUESTION # 107
In a campus network design, what ate two benefits of using BFD tor failure detection? (Choose two.)
- A. BFD provides path failure detection in less than a second.
- B. BFD provides fault tolerance by enabling multiple routers to appear as a single virtual router.
- C. BFD speeds up routing convergence time.
- D. BFD is an efficient way to reduce memory and CPU usage.
- E. BFD enables network peers to continue forwarding packets in the event of a restart.
Answer: A,D
NEW QUESTION # 108
......
Latest Cisco 350-401 Dumps with Test Engine and PDF: https://pass4sures.free4torrent.com/350-401-valid-dumps-torrent.html