Latest BCS CTFL18 Free Certification Exam Material with 582 Q&As
UPDATED CTFL18 Exam Questions Certification Test Engine to PDF
BCS CTFL18 exam is a great way for software testers to demonstrate their expertise and knowledge in the field. ISTQB Certified Tester Foundation Level 2018 certification is recognized globally and can lead to better job opportunities and higher salaries. To pass the exam, you need to have a good understanding of software testing concepts and methodologies, and you need to prepare well in advance by studying the exam syllabus and taking practice tests.
BCS CTFL18 exam consists of 40 multiple-choice questions, and candidates have 60 minutes to complete the exam. CTFL18 exam is available in multiple languages, and candidates can take it either in a testing center or online. CTFL18 exam covers various topics, including software development processes, testing techniques, testing types, and testing tools. CTFL18 exam is designed to test the candidate's knowledge and understanding of these concepts.
BCS CTFL18 certification exam is ideal for anyone who is interested in pursuing a career in software testing, including software testers, quality assurance professionals, and software developers. ISTQB Certified Tester Foundation Level 2018 certification is also suitable for those who are interested in expanding their knowledge of software testing and improving their skills in this area.
NEW QUESTION # 111
Given the following requirement:
Requirement ID: 2.8
Requirement Description: Additional Entrance Fee
Detailed Description:
An additional fee of $3 is charged during the weekend, but
1. Visitors aged under 7 are not charged.
2. Visitors aged 7 to 13 inclusive get a 20% discount off the additional fee.
3. Visitors aged greater than 65 get a 50% discount off the additional fee.
Age should be an integer of 0 or above.
Weekend means Friday to Sunday inclusive.
Which of the following statements is NOT correct?
- A. A minimum of 6 valid test cases are derived from boundary value analysis based on input age
- B. $3.01 is a valid output boundary value
- C. 7 and 13 are boundary values for the equivalence partition including age 10.
- D. Thursday is a valid input boundary value
Answer: D
NEW QUESTION # 112
Which of the following statements are TRUE?
A) Regression testing and acceptance testing are the same.
B) Regression tests show if all defects have been resolved.
C) Regression tests are typically well-suited for test automation.
D) Regression tests are performed to find out if code changes have introduced or uncovered defects.
E. Regression tests should be performed in integration testing.
- A. A, C and E are true; B and D are false.
- B. B and E are true; A, C and D are false.
- C. A, C and D and E are true; B is false.
- D. C and D are true; A, B and E are false.
Answer: D
NEW QUESTION # 113
Which TWO of the following test tools would be classified as test execution tools?
(a) Test data preparation tools
(b) Test harness
(c) Review tools
(d) Test comparators
(e) Configuration management tools
- A. b and d
- B. c and e
- C. c and d
- D. a and b
Answer: A
NEW QUESTION # 114
It is recommended to perform exhaustive tests for covering all combinations of inputs and preconditions.
- A. Yes, it's strongly recommended.
- B. Yes, and it's also necessary to include all the exit combinations
- C. No, risk analysis and priorities should be used to focus testing efforts
- D. Only the expert testers can make exhaustive tests.
Answer: C
NEW QUESTION # 115
Which of the following characteristics is most likely to promote effective software testing?
- A. Knowledge of the number of defects typically found in a program
- B. Independence from the production process
- C. Confidence that the next stage will find defects missed at this stage
- D. A belief that programmers always make mistakes
Answer: B
NEW QUESTION # 116
You are examining a document which gives the precise steps needed in order to execute a test.
What is the correct definition of this document?
- A. Test condition
- B. Test case specification
- C. Test procedure specification
- D. Test design specification
Answer: C
NEW QUESTION # 117
Which of the following is NOT an example of a typical risk-based testing activity?
- A. The focus of testing is shifted to an area in the system where tests find with more defects than expected
- B. Tests are prioritized to ensure that those associated with critical parts of the system are executed earlier
- C. Brainstorming sessions are held with a wide variety of stakeholders to identify possible failures in the system
- D. The evaluation of a risk-management tools to decide which tool to use for future projects
Answer: C
NEW QUESTION # 118
Which statement describes the term "Statement Coverage"?
- A. A method by which complex statements of the source code are completely executed.
- B. A tool used to execute all the statements of the source code.
- C. A metric for the ratio of statements in a source code that are executed at least once during the test.
- D. A test technique that generates a minimal set of tests cases guaranteed to exercise all the lines in source code.
Answer: C
NEW QUESTION # 119
Refer to the exhibit, the Cambrian Pullman Express has special ticketing requirements represented by the partial decision table below.
Carol has a student railcard and is travelling on a Flexible Standard Class ticket. James has a senior railcard and is travelling on a super saver ticket. Which of the options represents the correct actions for these two test cases?
- A. Carol is eligible to upgrade; James cannot use the service
- B. Carol is OK to travel; James is eligible for an upgrade
- C. Carol is OK to travel; James cannot use the service
- D. Carol and James are both eligible to upgrade
Answer: A
NEW QUESTION # 120
Which of the following statements is not correct?
- A. Looking for defects in system requires professional pessimism and curiosity
- B. Identifying defects may be perceived as criticism against product
- C. Looking for defects in a system may require ignoring system details
- D. Testing is often seen as a destructive activity instead of constructive activity
Answer: D
NEW QUESTION # 121
An Incident Management tool implements the following defect state: Open, Assigned, Solved, Closed.
Consider the following defect report:
Id: T000561
Test Object: "Warehouse Management" application
Tester name: John Bishop
Date: 10th, April 2010
Test Case: MRT5561
Status: Serious
Priority:
Problem: After inputting the Total Quantity item = 450 in the SV034 screen, the system shows an unexpected error message = 47 Correction:
Developer name:
Closing date:
Which of the following is a valid criticism of this report?
- A. The version of the application is missing
- B. There is no link to the applicable requirement (traceability)
- C. The Priority, the Correction description and the Developer name are missing
- D. The description is not highlighting the source of the problem
Answer: A
NEW QUESTION # 122
Maintenance testing is:
- A. testing by users to ensure that the system meets a business need
- B. updating tests when the software has changed
- C. testing a released system that has been changed
- D. testing to maintain business advantage
Answer: C
NEW QUESTION # 123
Tests have been specified for the latest software release and users have prioritised these.
However, there are some dependencies between tests as shown in the table below (e.g. Test ID.
'123' cannot be run until Test ID. '456' has been successfully completed).
Which test execution schedule best meets the prioritisation and dependency conditions?
- A. 5, 7, 4, 3, 9, 10, 1, 6, 8, 2.
- B. 6, 1, 2, 9, 4, 3, 5, 7, 8, 10.
- C. 1, 4, 3, 5, 2, 7, 9, 10, 6, 8.
- D. 3, 5, 7, 10, 2, 4, 6, 8, 9, 1.
Answer: C
NEW QUESTION # 124
Which of the following is NOT a valid objective of testing?
- A. Investigating and fixing defects in the software under test
- B. Providing information for stakeholders' decision making
- C. Gaining confidence that the system is fit-for-purpose
- D. Preventing defects from being introduced into the code
Answer: B
NEW QUESTION # 125
Which is not a major task of test implementation and execution?
- A. Develop and prioritizing test cases, creating test data, writing test procedures and optionally, preparing test harness and writing automated test scripts.
- B. Logging the outcome of test execution and recording the identities and versions of the software under test, test tools and testware.
- C. Verifying that the test environment has been set up correctly.
- D. Checking test logs against the exit criteria specified in test planning.
Answer: D
NEW QUESTION # 126
Which of the following is an example of Static testing?
- A. Performance testing
- B. Calculating path coverage using tools
- C. Usability testing
- D. Requirements review
Answer: C
NEW QUESTION # 127
Which of the following statements regarding incidents is NOT true?
- A. The discrepancies between actual and expected outcomes needs to be logged as incidents.
- B. Incidents may be raised during development, review, testing or use of a software product.
- C. Since incidents are the discrepancies between actual and expected outcomes they cannot be raised during development.
- D. Incidents should be tracked from discovery and classification to correction and confirmation of the solution.
Answer: C
NEW QUESTION # 128
......
Get The Important Preparation Guide With CTFL18 Dumps: https://pass4sures.free4torrent.com/CTFL18-valid-dumps-torrent.html