[Jan 23, 2026] Fast Exam Updates SC-401 dumps with PDF Test Engine Practice
Exam Valid Dumps with Instant Download Free Updates
Microsoft SC-401 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 72
You have a Microsoft 365 E5 subscription that uses Microsoft Defender for Cloud Apps.
You need to ensure that you receive an alert when a user uploads a document to a third-party cloud storage service.
What should you use?
- A. an activity policy
- B. a file policy
- C. a sensitivity label
- D. an insider risk policy
Answer: A
Explanation:
Activity Policy (MCAS): Monitors and alerts on specific user actions such as uploading files, downloads, or logins to cloud apps. Perfect for detecting "upload to third-party storage".
Sensitivity label: Used for classifying and protecting content, not generating alerts.
File policy (MCAS): Inspects and governs files already stored in sanctioned apps, not upload activity.
Insider risk policy: Focuses on risky behavior like data exfiltration or security violations, not direct activity alerts in cloud apps.
The answer: A. an activity policy
Reference: Defender for Cloud Apps activity policies
NEW QUESTION # 73
You are creating a DLP policy named Policy1 that will be applied to the locations as shown in the following exhibit.
Policy1 contains an advanced data loss prevention (DLP) rule named Rule1.
Which two conditions can you use in Rule1? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. Content contains
- B. Document size equals or is greater than
- C. Content is shared from Microsoft 365
- D. Attachment's file extension is
- E. Document property is
Answer: A,C
Explanation:
You are creating a Data Loss Prevention (DLP) policy in Microsoft 365 with advanced rules. Advanced DLP rules provide more granular conditions and actions than standard DLP rules.
Conditions available in advanced DLP
According to Microsoft Docs on Conditions in DLP policies:
* # Content contains # Used to detect sensitive information types, keywords, or exact data matches.
This is one of the most common and fundamental DLP conditions.
* # Content is shared from Microsoft 365 # Used to detect whether content has been shared externally or with specific domains/users. This is a modern advanced DLP condition.
Why the others are not correct:
* A. Document property is # This condition applies to information governance retention policies
/labels (not DLP). Not available in DLP rules.
* B. Attachment's file extension is # This is supported in Exchange mail flow rules (transport rules) but not in advanced DLP rules.
* C. Document size equals or is greater than # Also applies in Exchange transport rules and certain SharePoint restrictions, but not available as a DLP rule condition.
NEW QUESTION # 74
You have a Microsoft 365 E5 subscription that contains three users named U$er1, User2, and User3. The subscription contains the groups shown in the following table.
The subscription contains the devices shown in the following table.
All the devices are onboarded to Microsoft Purview.
You have the data loss prevention (DLP) policies shown in the following table.
Answer:
Explanation:
Explanation:
NEW QUESTION # 75
You have a data loss prevention (DIP) policy that has the advanced DIP rules shown in the following table.
You need to identity which rules will apply when content matches multiple advanced DIP rules.
Which rules should you identify? To answer, select the appropriate options in the answer area.
Answer:
Explanation:
Explanation:
Comprehensive Detailed Explanation with References
When multiple advanced DLP rules match content, Microsoft 365 DLP evaluates based on:
Rule priority
Lower number = higher priority (0 highest).
Among Rule2 (priority 1), Rule3 (priority 2), and Rule4 (priority 3), Rule2 has the highest priority.
Conflict resolution (single vs multiple rules applied)
By default, only the highest-priority rule applies if multiple rules match. # That's why in the first dropdown, the correct answer is Only Rule2 takes effect.
However, you can configure advanced DLP to allow multiple matching rules to take effect simultaneously. If this setting is enabled, then Rule2, Rule3, and Rule4 all apply. # That's why in the second dropdown, the correct answer is Rule2, Rule3, and Rule4 take effect.
References:
Microsoft Learn: Order of rule processing in DLP
Microsoft Learn: Advanced DLP rule precedence
NEW QUESTION # 76
You have a Microsoft 365 E5 subscription that contains a data loss prevention (DLP) policy named DLP1.
DLP1 contains the DLP rules shown in the table.
You need to ensure that when a document matches all the rules, users will see Tip 2.
What should you change?
- A. the priority setting of Rule2 to 2
- B. the priority setting of Rule2 to 0
- C. the If there's a match for this rule, stop processing additional DLP policies and rules setting for Rule3 to Enabled
- D. the priority setting of Rule3 and Rule4 to 0
Answer: B
NEW QUESTION # 77
You have a Microsoft 365 IS subscription that contains the resources shown in the following table.
The subscription contains a Windows 11 device named Device 1 and has the Microsoft Purview Information Protection client installed. Device i contains the resources shown in the following table.
You publish a sensitivity label named Label1 to User1 and Group1.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
Explanation:
Explanation:
Step 1 - Label publishing and scope
The sensitivity label Label1 is published to User1 and Group1.
User1 # Directly included in label publishing.
User2 # Member of Group1, so also included indirectly.
This means both User1 and User2 are eligible to use Label1.
Step 2 - File vs Folder labeling with the Information Protection client The Microsoft Purview Information Protection (AIP unified labeling) client can apply labels to files such as .
docx, .png, .pdf, etc.
It cannot label folders directly. Labels are applied to items (files and emails), not folders.
Reference: Apply sensitivity labels using the AIP client
Step 3 - Analyze each statement
User1 can apply Label1 to File1.png
File1.png is a file type supported by the Information Protection client.
User1 has Label1 published directly.
User1 can apply Label1 to Folder2
Sensitivity labels cannot be applied to folders in File Explorer.
User2 can apply Label1 to File2.docx
File2.docx is a supported file type (Word document).
User2 is a member of Group1, and Label1 is published to Group1.
NEW QUESTION # 78
HOTSPOT
How many files in Site2 can User1 and User2 access after you turn on DLPpolicy1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
A screenshot of a computer AI-generated content may be incorrect.
Understanding DLP Policy Impact on File Access
The DLP policy (DLPpolicy1) applies to Site2 and restricts access when:
# Content contains SWIFT Codes.
# Instance count is 2 or more.
File Analysis (Based on SWIFT Codes Count)
A screenshot of a computer AI-generated content may be incorrect.
Files that remain accessible (not restricted by DLP):
# File1.docx (Contains only 1 SWIFT Code # Below restriction threshold) User access after DLP policy is applied:
A screenshot of a computer AI-generated content may be incorrect.
User1 (Site Owner):
# Has higher privileges and can override DLP restrictions (through admin intervention).
# Can access 2 files (File1.docx + override access to another file).
User2 (Site Visitor):
# Has read-only access but DLP blocks access to restricted files.
# Can only access 1 file (File1.docx), since all others are restricted.
NEW QUESTION # 79
You have a Microsoft 365 E5 tenant.
You create a data loss prevention (DLP) policy.
You need to ensure that the policy protects documents in Microsoft Teams chat sessions.
Which location should you enable in the policy?
- A. Teams chat and channel messages
- B. SharePoint sites
- C. Exchange email
- D. OneDrive accounts
Answer: A
Explanation:
To extend DLP to Teams, you must enable Teams chat and channel messages as a location in the DLP policy.
SharePoint and OneDrive protect stored content, but chat sessions require the Teams-specific location.
Reference: DLP in Microsoft Teams
NEW QUESTION # 80
You have a Microsoft 365 E5 subscription.
You need to enable support for sensitivity labels in Microsoft SharePoint Online.
What should you use?
- A. the Microsoft Purview portal
- B. the Microsoft Entra admin center
- C. the SharePoint admin center
- D. the Microsoft 365 admin center
Answer: C
Explanation:
To enable support for sensitivity labels in Microsoft SharePoint Online, you must configure the setting in the SharePoint admin center.
Sensitivity labels in SharePoint Online allow labeling and protection of files stored in SharePoint and OneDrive. This feature must be enabled in the SharePoint admin center # Settings # Information protection to allow sensitivity labels to apply encryption and protection to stored documents.
NEW QUESTION # 81
You need to meet the technical requirements for the Site1 documents.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
The goal is to automatically label documents in Site1 that contain credit card numbers. To achieve this, we need a sensitivity label with an auto-labeling policy based on a sensitive info type that detects credit card numbers.
Step 1: Create a Sensitive Info Type
# A sensitive info type is needed to detect credit card numbers in documents.
# Microsoft Purview includes built-in sensitive info types for credit card numbers, but we can also create a custom one if necessary.
Step 2: Create a Sensitivity Label
# A sensitivity label is required to classify and protect documents containing sensitive information.
# This label can apply encryption, watermarking, or access controls to credit card data.
Step 3: Create an Auto-Labeling Policy
# An auto-labeling policy ensures that the sensitivity label is applied automatically when credit card numbers are detected in Site1.
# This policy is configured to scan files and automatically apply the correct sensitivity label.
NEW QUESTION # 82
You have a Microsoft SharePoint Online site named Site! that contains the files shown in the following table.
You have a data loss prevention (DLP) policy named DLP1 that has the advanced DLP rules shown in the following table.
You apply DLP1 toSite1.
Which policy tips will appear for File2?
- A. Tip1 only
- B. Tip3 only
- C. Tip1 and Tip2 only
- D. Tip2 only
Answer: D
Explanation:
Comprehensive Detailed Explanation with References
Step 1 - Review File2 contents
File2 contains 3 IP addresses.
Step 2 - Review DLP rules and priorities
RuleConditionPolicy TipStop Processing?Priority
Rule11 or more IP addressesTip1No0
Rule23 or more IP addressesTip2Yes1
Rule32 or more IP addressesTip3No2
Step 3 - Rule evaluation order
Advanced DLP rules are processed by priority order (lowest number first).
Rule1 (Priority 0) will trigger because File2 has at least 1 IP address.
This applies Tip1.
However, Rule1 has Stop Processing = No, so evaluation continues.
Rule2 (Priority 1) will also trigger because File2 has 3 IP addresses (#3).
This applies Tip2.
Rule2 has Stop Processing = Yes, so evaluation stops after this.
Rule3 (Priority 2) will not be evaluated because Rule2 stopped processing.
Step 4 - Final outcome
File2 matches Rule1 (Tip1), but since Rule2 fires afterward with Stop Processing = Yes, only Tip2 is applied.
Step 5 - Microsoft Reference
From Microsoft docs: "When a rule is configured to stop processing, subsequent rules are not evaluated and only the policy tip from the last triggered rule with stop processing applies." Reference: Order of rule processing in DLP policies
NEW QUESTION # 83
You have a Microsoft 365 tenant
You need to create a new sensitive into type for items that contain the following:
* An employee ID number that consists of the hire date of the employee followed by a three digit number
* The words "Employee", "ID", or "Identification" within 300 characters of the employee ID number What should you use for the primary and secondary elements? To answer, select the appropriate options m the answer area NOTE: Each correct selection is worth one point
Answer:
Explanation:
Explanation:
Step 1 - Requirement
We need a custom sensitive information type (SIT) that detects:
An employee ID number in a specific format # hire date + three digits.
This is a pattern-based requirement.
Specific keywords within 300 characters of that ID # "Employee", "ID", or "Identification".
This is a keyword proximity requirement.
Step 2 - Sensitive info type elements in Microsoft 365
When creating custom SITs, you define primary and secondary elements:
Primary element # The main pattern or data to detect (the most defining factor).
Secondary element # Supporting evidence that must be found near the primary element to increase confidence.
Available elements:
Regular expression # Used to define patterns such as date + digits (for employee ID).
Keyword list # Used for lists of words/phrases like "Employee", "ID", "Identification".
Functions # Used for built-in validators like credit card checksum, not relevant here.
# Reference: Create a custom sensitive information type in Microsoft 365 Step 3 - Apply to scenario Employee ID pattern (hire date + 3 digits) # Needs a regular expression # This must be the Primary element.
Keywords ("Employee", "ID", "Identification") within 300 characters # A keyword list # This must be the Secondary element.
NEW QUESTION # 84
You have a Microsoft 365 E5 subscription that contains a device named Device1.
You need to enable Endpoint data loss prevention (Endpoint DLP) for Device1.
What should you do first in the Microsoft Purview portal?
- A. Enable Microsoft Priva Privacy Risk Management.
- B. Turn on device onboarding.
- C. Add a Microsoft Purview Information Protection scanner cluster.
- D. Onboard Device1 to Microsoft Purview.
- E. Create a Microsoft Purview Information Barriers (IBs) segment.
Answer: B
NEW QUESTION # 85
You have a Microsoft 365 E5 subscription.
You are implementing insider risk management.
You need to maximize the amount of historical data that is collected when an event is triggered.
What is the maximum number of days that historical data can be collected?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 86
You need to meet the technical requirements for the Site1 documents.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
A screenshot of a questionnaire AI-generated content may be incorrect.
The goal is to automatically label documents in Site1 that contain credit card numbers. To achieve this, we need a sensitivity label with an auto-labeling policy based on a sensitive info type that detects credit card numbers.
Step 1: Create a Sensitive Info Type
# A sensitive info type is needed to detect credit card numbers in documents.
# Microsoft Purview includes built-in sensitive info types for credit card numbers, but we can also create a custom one if necessary.
Step 2: Create a Sensitivity Label
# A sensitivity label is required to classify and protect documents containing sensitive information.
# This label can apply encryption, watermarking, or access controls to credit card data.
Step 3: Create an Auto-Labeling Policy
# An auto-labeling policy ensures that the sensitivity label is applied automatically when credit card numbers are detected in Site1.
# This policy is configured to scan files and automatically apply the correct sensitivity label.
NEW QUESTION # 87
Your company has offices in multiple countries.
The company has a Microsoft 365 E5 subscription that uses Microsoft Purview insider risk management.
You plan to perform the following actions:
*In a new country, open an office named Office1.
*Create a new user named User1.
*Deploy insider risk management to Office1.
*Add User1 to the Insider Risk Management Admins role group.
You need to ensure that User1 can perform insider risk management tasks for only the users and the devices in Office1.
What should you create first?
- A. a dynamic user group
- B. a management group
- C. an administrative unit
- D. a dynamic device group
Answer: C
Explanation:
To ensure User1 can perform insider risk management tasks only for the users and devices in Office1, the first step is to create an administrative unit in Microsoft Entra ID (formerly Azure AD).
Administrative units allow you to scope permissions to specific users, devices, and locations. By creating an administrative unit for Office1 and assigning User1 to the Insider Risk Management Admins role group within that unit, User1 will only have access to users and devices in Office1.
NEW QUESTION # 88
You have a Microsoft 365 E5 subscription that contains four users named User1. User2, User3, and User4 and a file named File1.docx. File1 has a sensitivity label applied. The label is configured as shown in the following table.
Which users can summarize File1 by using Microsoft 365 Copilot?
- A. User1, User2, User3. and User4
- B. User1, User2. and User3 only
- C. User1 only
- D. User1 and User2 only
Answer: D
NEW QUESTION # 89
You have a Microsoft 365 E5 subscription.
You plan to deploy Microsoft Purview Data Security Posture Management for Al (DSPM for Al) to protect company data that contains Personally Identifiable Information (Pll) from being shared with third-party generative Al tools.
You need to complete the prerequisites for the planned deployment.
Which two Microsoft Purview solutions should you use? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Insider Risk Management
- B. Communication Compliance
- C. Audit
- D. Information Barriers
- E. Data Loss Prevention
Answer: C,E
NEW QUESTION # 90
You have a Microsoft 365 E5 subscription that contains a Microsoft SharePoint Online site named Site! and the data loss prevention (DLP) policies shown in the following table.
The DLP rules are configured as shown In the following table.
All the policies are assigned to Site1.
You need to ensure that if a user uploads a document to Site1 that matches all the rules, the user will be shown the Tip 2 policy tip. What should you do?
- A. Change the priority of DLP2 to 0.
- B. Prevent additional processing of the policies if there is a match for Rule2
- C. Change the priority of DLP2 to 3.
- D. Enable additional processing of the policies if there is a match for Rule1.
Answer: A
Explanation:
Current setup:
DLP1 (priority 0, Rule1) # Stop processing additional rules enabled # means if Rule1 matches, later rules (including Rule2 with Tip2) will never be evaluated.
Requirement: Ensure that if all rules match, the user sees Tip2 (Rule2's policy tip).
To fix this: Move DLP2 above DLP1 in priority (i.e., set DLP2 = priority 0). Then Rule2 will be evaluated first, and its policy tip (Tip2) will be displayed.
Why not others?
B). Prevent additional processing of the policies if there is a match for Rule2: That would stop processing later, but DLP1 would still block earlier due to its higher priority.
C). Change the priority of DLP2 to 3: That pushes it even lower, making it worse.
D). Enable additional processing for Rule1: Rule1 already has stop processing enabled. Changing that does not ensure Rule2 runs before Rule1, because priority is evaluated first.
Reference:
Microsoft Learn: Order of rule processing in DLP
# Policies with lower priority numbers run first, and "Stop processing" ends evaluation.
NEW QUESTION # 91
......
Download SC-401 Exam Dumps PDF Q&A: https://pass4sures.free4torrent.com/SC-401-valid-dumps-torrent.html