Download the Latest 300-410 Dumps - 2025 300-410 Exam Questions
Latest Cisco 300-410 Certification Practice Test Questions
Cisco 300-410: Implementing Cisco Enterprise Advanced Routing and Services exam is a certification test that is designed for IT professionals who want to validate their knowledge and skills in managing and implementing advanced routing and services in an enterprise network. 300-410 exam is intended for individuals who have knowledge of Cisco technologies and are committed to advancing their careers in network engineering.
Test Details
Before commencing your preparation, the learners should first get the right information about the official test, including its content, objectives, and structure. The exam itself is 90 minutes long and costs $300 on Pearson VUE. You can take it in either Japanese or English. There will be about 60 questions of various types. They include multiple choices with a single answer, multiple-choice with multiple answers, drag and drop, as well as fill-in-the-blank. Overall, it is a difficult test, but detailed and wise preparation will turn the tables. Generally, there are a few training options available for you that you can choose from. If you think that you need to go deeper into studying each topic, then you should complete the official instructor-led course or you can opt for in-class or online training. Alternatively, you can just do self-study and use exam dumps as well. After you are done with the courses and have covered all the relevant preparation materials, you should take some practice tests to gauge your knowledge level.
The Cisco 300-410 exam consists of multiple-choice questions, simulation questions, and drag-and-drop questions, which test the candidate’s ability to apply their knowledge to practical scenarios. 300-410 exam is also timed, with a total of 90 minutes to complete it. Candidates must have a thorough understanding of the subject matter and be able to answer the questions quickly and accurately to succeed in 300-410 exam.
NEW QUESTION # 204 
Refer to the exhibit. The client server but the show command does not show the IPv6 DHCP bindings on the server. Which action resolves the issue?
- A. Configure authorized DHCP servers to avoid IPv6 addresses from a rogue DHCP server.
- B. Use the 2001:DBB:BAD:C0DE::/64 prefix for the DHCP pool on R1.
- C. Extend the DHCP lease time because R1 removed the IPv6 address earlier after the lease expired.
- D. Configure H1 as the DHCP client that manually assigns the IPv6 address on interlace e0/0..
Answer: B
NEW QUESTION # 205
During the maintenance window an administrator accidentally deleted the Telnet-related configuration that permits a Telnet connection from the inside network (Eth0/0) to the outside of the networking between Friday - Sunday night hours only. Which configuration resolves the issue?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: D
NEW QUESTION # 206
The network administrator configured the router for Control Plane Policing to limit OSPF traffic to be policed to 1 Mbps. Any traffic that exceeds this limit must also be allowed at this point for traffic analysis. The router configuration is:
access-list 100 permit ospf any any
!
class-map CM-OSPF
match access-group 100
!
policy-map PM-COPP
class CM-OSPF
police 1000000 conform-action transmit
!
control-plane
service-policy output PM-COPP
The Control Plane Policing failed to monitor and police OSPF traffic. Which configuration resolves this issue?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: A
NEW QUESTION # 207
What are two functions of LDP? (Choose two.)
- A. It must use Resource Reservation Protocol.
- B. It requires MPLS Traffic Engineering.
- C. It uses Forwarding Equivalence Class
- D. It advertises labels per Forwarding Equivalence Class.
- E. It is defined in RFC 3038 and 3039.
Answer: C,D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/mpls/configuration/guide/mpls_cg/mp_
NEW QUESTION # 208
Which values identifies VPNs in an EVN environment?
- A. Route target
- B. Virtual network tag
- C. VLAN ID
- D. DLCI
Answer: B
Explanation:
Explanation/Reference:
https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/layer-3-vpns-l3vpn/whitepaper_c11-
638769.html
NEW QUESTION # 209 
Refer to the exhibits. To provide reachability to network 10.1.1.0/24 from R5, the network administrator redistributes EIGRP into OSPF on R3 but notices that R4 is now taking a suboptimal path through R5 to reach
10.1.1.0/24 network.
Which action fixes the issue while keeping the reachability from R5 to 10.1.1.0/24 network?
- A. Apply the outbound distribution list on R5 toward R4 in OSPF.
- B. Redistribute OSPF into EIGRP on R4.
- C. Change the administrative distance of OSPF to 200 on R5.
- D. Change the administrative distance of the external EIGRP to 90.
Answer: D
Explanation:
Section: Mixed Questions
NEW QUESTION # 210
Refer to the exhibit.
User in the branch network of 2001. db8 0.4 report they cannot access the internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?
- A. Issue the eighr command on R2.
- B. Issue the no eighrp stub command on R2.
- C. Issue the no neighbor stub command on R2.
- D. Issue the eigrp stub command on R1
Answer: C
NEW QUESTION # 211 
Refer to the exhibit. A network administrator redistributed the default static route into OSPF toward all internal routers to reach to Internet. Which set of commands restores reachability to the Internet by internal routers?
- A. router ospf 1network 0.0.0.0 0.0.0.0 area 0
- B. router ospf 1redistribute connected 0.0.0.0
- C. router ospf 1default-information originate
- D. router ospf 1redistribute static subnets
Answer: C
NEW QUESTION # 212
Refer to the exhibit.
Refer to the exhibit The enterprise users fail to authenticate with the TACACS server when a direct fiber link fails between RB and RD The NOC team observes Users connected on AS65201 fail to authenticate with TACACS server 192 168 1 1 Users connected on AS65101 successfully authenticate with TACACS server 192 168 1 1 All AS65101 and AS65201 users are configured to authenticate with the TACACS server Which configuration resolves the issue?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 213
Refer to the exhibit.
An IT staff member comes into the office during normal office hours and cannot access devices through SSH Which action should be taken to resolve this issue?
- A. Modify the access list to correct the subnet mask
- B. Configure the correct time range.
- C. Modify the access list to use the correct IP address.
- D. Configure the access list in the outbound direction.
Answer: C
Explanation:
Explanation
To ACL should be permit tcp 101 10.1.1.1 0.0.0.0
NEW QUESTION # 214
Refer to the exhibit. An engineer observes that every time the ICMP packet is lost at a polling interval, track 1 goes down, which causes unnecessary disruption and instability in the network.
The engineer does not want the traffic to be rerouted if the loss of ICMP packets is negligible. If the packet loss is persistent for a longer duration, the track must go down and the traffic must be rerouted. Which action resolves the issue?
- A. Increase the timeout value from 1000 to 1500.
- B. Define a delay timer under track 1.
- C. Increase the threshold value from 1000 to 1500.
- D. Change the IP SLA schedule to run only at certain intervals.
Answer: B
NEW QUESTION # 215
Refer to the exhibit.
A router receiving BGP routing updates from multiple neighbors for routers in AS 690. What is the reason that the router still sends traffic that is destined to AS 690 to a neighbor other than 10.222.1.1?
- A. The route map is applied in the wrong direction.
- B. The local preference value should be set to the same value as the weight in the route map.
- C. The weight value in another neighbor statement is higher than 200.
- D. The local preference value in another neighbor statement is higher than 250.
Answer: A
NEW QUESTION # 216
Refer to the exhibit.
Which configuration configures a policy on R1 to forward any traffic that is sourced from the 192.168.130.0/24 network to R2?
- A. Option B
- B. Option A
- C. Option C
- D. Option D
Answer: D
NEW QUESTION # 217 
Refer to the exhibit. R2 has two paths to reach 192.168.13.0/24. but traffic is sent only through R3. Which action allows traffic to use both paths?
- A. Configure the bandwidth 2000 command under interface FastEthernet0/0 on R2.
- B. Configure the delay 1 command under interface FastEthernet0/0 on R2.
- C. Configure the variance 2 command under the EIGRP process on R2
- D. Configure the variance 4 command under the EIGRP process on R2.
Answer: D
Explanation:
Explanation
From the output of the "show ip eigrp topology ..." command, we notice network 192.168.13.0/24 was learned via two routes:+ From 192.168.23.3 (R3) with FD = 1075200 and AD = 281600+ From 192.168.12.1 (R1) with FD = 2611200 and AD = 281600 From the output of the "show ip route ..." command, we learned that the best (and chosen) path is via
192.168.23.3 (R3).
To use both paths (called unequal cost load balancing) with EIGRP, the second path via R1 must satisfy the feasibility condition. The feasibility condition states that, theAdvertised Distance (AD) of a route must be lower than the feasible distance of the current successor route.
In this case, the second path satisfies the feasible condition as its AD (281600) is smaller than the FD (1075200) of the best path. Therefore we can configure loadbalancing with "variance" command.
In other words, EIGRP will install all paths with metric < variance * best_metric into the local routing table, provided that it meets the feasibility condition to preventrouting loop. Therefore we can calculate the variance
> metric / best_metric = 2611200 / 1075200 =2.4.
So with a variance greater than 2 (and must be an integer), we can load balance traffic to network
192.168.13.0/24.
NEW QUESTION # 218
Drag and drop the packet from the left onto the correct descriptions on the right.
Answer:
Explanation:
Explanation
Data plane packets = User-generated packets that are always forwarded by network devices to other end-station devices Control plane packets - Network device generated or received packets that are used for the creation and operation of the network itself.
Management plane packets - Network device generated or received packets, or management station generated or received packets that are used to manage/operate the network Services plane packets = user generated packets that are forwarded by network devices to other end station devices, but that require higher priority than the normal traffic by the network devices.
https://tools.cisco.com/security/center/resources/copp_best_practices
NEW QUESTION # 219 
Refer to the exhibit. Users on a call center report that they cannot browse the internet on Saturdays during the afternoon. Which configuration resolves the issue?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 220
Refer to the exhibit. Which action resolves the failed authentication attempt to the router?
- A. Configure aaa authorization login command on line vty 0 4
- B. Configure aaa authorization login command on line console 0
- C. Configure aaa authorization console global command
- D. Configure aaa authorization console command on line vty 0 4
Answer: C
Explanation:
In the debug output, we see that the Authorization (not Authentication) failed so we need to correct the authorization. In order to enable authorization, we must use the global command "aaa authorization console" first.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/security/a1/sec-a1-cr-book/sec-cr-a1.html
NEW QUESTION # 221
Refer to the exhibit.
A network administrator is discovering a Cisco Catalyst 9300 and a Cisco WLC 3504 in Cisco DNA Center. The Catalyst 9300 is added successfully However the WLC is showing [ error "uncontactable" when the administrator tries to add it in Cisco DNA Center. Which action discovers WLC in Cisco DNA Center successfully?
- A. Delete the WLC 3504 from Cisco DNA Center and add it to Cisco DNA Center again.
- B. Copy the .pern file from the Cisco DNA Center on the USB and upload it to the WLC 3504.
- C. Add the WLC 3504 under the hierarchy of the Catalyst 9300 connected devices.
- D. Copy the .cert file from the Cisco DNA Center on the USB and upload it to the WLC 3504.
Answer: B
NEW QUESTION # 222
......
Verified 300-410 Dumps Q&As - 1 Year Free & Quickly Updates: https://pass4sures.free4torrent.com/300-410-valid-dumps-torrent.html